Screw connections
Tube fittings for double conical ring (GE)
Straight screw-in sockets with tapered screw-in thread
In conjunction with the appropriate union screw, they provide a secure seal for pipe connections. Double tapered rings are used for the solderless connection of steel or copper pipes within the centralised lubrication stops.
for pipe Ø: 4 / 6 / 8 mm
Thread: M 8x1 / M 10x1 / M 12x1
Material: Aluminium / brass / nickel-plated brass
Area of application: Centralised lubrication systems
Data Sheet
Pipe fittings for double conical ring (W)
Angle screw-in socket and pipe connector
for double conical ring and union screw
Pipes and fittings are mainly used to transport liquids and gases. For this reason, they must have threaded connections that are gas and liquid-tight.
for pipe Ø: 4 / 6 mm
Thread: M 8x1 / M 10x1
Material: Aluminium / brass / nickel-plated brass / stainless steel
Areas of application: Centralised lubrication systems
Data Sheet
Cutting ring screw connections
A cutting ring fitting is a liquid-tight pipe connection technology developed for the highest pressures. By tightening the union nut, which is tapered on the inside, the cutting ring is compressed so that the wedge-shaped inside of the ring cuts into the pipe wall and creates a tight form fit.
for pipe Ø: 4 / 6 / 8 mm
Thread: M 6x0.75 / M 6x1 / M 8x1 / M 8x1.25 / M 10x1 / M 12x1 / G 1/8 / G 1/4 / R 1/8 / R 1/4
Material: Aluminium / brass / nickel-plated brass / galvanised steel
Areas of application: Metering systems, centralised lubrication systems
Data Sheet
Push-in connectors
With the help of a push-in fitting, supply lines can be connected quickly and easily to other components in the pipework system.
Push-in fittings offer a clear advantage over cutting ring fittings in terms of installation time and can be reused many times over.
for pipe Ø: 4 / 6 mm
Thread: M 5 / M 6x1 / M 6x1 conical / M 8x1 / M 10x1 / G 1/8 / G 1/4 / R 1/8
Material: Brass / nickel-plated brass
Areas of application: Dosing systems, centralised lubrication systems
Data Sheet
Mould countersink for pipe connections
All tube fittings are double cone ring fittings with a small size and low weight and can therefore be used not only for centralised lubrication systems, but also for a wide range of other applications.
The countersink can be used to produce suitable moulded threaded holes in which double conical ring fittings can be fitted directly into production parts.
for tube Ø: 4 / 6 / 8 mm
Thread: M 8x1 / M 10x1 / M 12x1
Areas of application: Dosing systems, centralised lubrication systems
Data Sheet